The company successfully shipped the second batch of 800 centrifugal spray dryer to Ningxia Hui Autonomous Region on June 29.

After the installation of equipment components, the second batch of accessories will be sent to Ningxia according to the installation principle of spray dryer combination. Batch shipment and installation of equipment can greatly reduce the pressure on workers during installation, avoid the risk of equipment leakage and loss, and ensure the integrity of the equipment.

Spray drying is widely used in liquid forming and drying industries. It is suitable for generating powder and granular solid products in solution, lotion, suspension and paste liquid raw materials. Therefore, spray drying is an ideal process when the particle size distribution, residual moisture content, bulk density and particle shape of the finished product must meet accurate standards.

The working principle of this device is that the air is filtered and heated, and enters the air distributor at the top of the dryer. The hot air enters the drying chamber uniformly in a spiral shape. The feed liquid passes through the high-speed centrifugal atomizer on the top of the tower body, and (rotating) spray into extremely fine mist like liquid beads, which can be dried into finished products in a very short time in parallel with hot air. The finished product is continuously output from the bottom of the drying tower and the cyclone separator, and the waste is discharged by the fan.